|
| |
|
Hydro-Weed
The Environmental Clean-Up Product For the 21st
Century!
Watch the Video
|
 |
-
Absorbs 15
times as much hydrocarbon as the equivalent clay by weight!
-
Less
expensive than clay when comparing absorbent value!
-
Dispose of Hydroweed in your Garden!
Hydro-Weed is one of Nature's non-chemical wonders.
Using a select type of peat moss, and a processing that sterilizes the individual fibers
while killing off the insects, Hydro-Weed is a safe, environmentally friendly product that
reacts just the opposite of what you would expect.
Because Hydro-Weed will NOT release soaked up oil or other
hydrocarbons, it is the ideal product for cleaning up any type of oil or chemical spill.
While peat moss is normally used in gardening to retain moisture around plant roots,
Hydro-Weed differs in that it rejects water indefinitely. It literally locks up the
chemical along with any heavy metals, preventing them from leaking or washing out once
they are absorbed.
Any type of hydrocarbon leak on the surface of water be it an
ocean, lake, stream or river presents a danger of contamination to the water as well as
all living creatures, vegetation and shore lines.
Hydro-Weed sprinkled on the top of the
spill contains the chemicals and 'locks it up' so that it cannot stick to any living
creature, vegetation or shore line. It also prevents the chemical from sinking to the
bottom once it is in its fiber.
A bird landing on the top of a spill treated with
Hydro-Weed would simply take off again without a single drop of oil on its feathers.
One pound of Hydro-Weed will absorb eight to twelve times its
weight in medium weight oil.
That is fifteen times more than clay absorbers. Hydro-Weed is
non corrosive, non polluting and non toxic.
It is completely safe and easy to use. Once
the spill has been cleaned up, you can simply dispose of the Hydro-Weed by spreading it
along a fence line or elsewhere for weed control.
Nature will then provide the microbes
who will eat the oil or chemical contained in it and the peat moss construction of the
Hydro-Weed will benefit the soil just as any other peat moss would do.
Hydro-Weed is ideal for those living near a body of water, boat
owners, and anyone else who regularly uses chemicals or encounters spills.
Hydro-Weed
works just as well on dry surfaces or on soil as it does on water. It will selectively
pick up a chemical spill on a wet roadway and leave the water behind.
Hydro-Weed can be
used as a packing, material in boxes containing shipments of chemical products, or
anything else that may leak or create moisture.
Every transporter should carry Hydro-Weed
to safeguard against insurance loss and environmental damage. Every household should have
an ample supply of Hydro-Weed to catch and absorb oil, grease and other hydrocarbons, and
dispose of them in an environmentally safe manner.
Nothing else does what Hydroweed
does - Nothing!
Typical Hydroweed
Stories
A top ten chemical company last year had a 500 gallon spill. They
cleaned the spill with a clay-based product used by most organizations.
The spill took
seven hours to clean and they had 55 drums of hazardous wastes to remove at $250.00 per
drum.
Recently they again had a 500 gallon spill, this time they used HYDRO-WEED. The end
result was the clean-up took two hours with only 14 drums of waste which they had the
option to be incinerated in lieu of hazardous waste to be buried.
A Fortune 500 chemical company in Delaware had oil leading and
filling up their cement block walls. They hired an environmental cleanup company to drain
the walls and clean the spill.
The company started the cleanup by knocking holes in the
blocks and letting the oil run out They used HYDRO-WEED to absorb the oil by covering the
floor. HYDRO-WEED was ideal since it is non-tracking.
The chemical company said they had
never seen such a product work so well. The environmental cleanup company calls HYDRO-WEED
their magic powder.
What is Hydro Weed?
A non-toxic, non-abrasive organic blonde sphagnum peat moss
harvested from the bogs of Newfoundland.
A lightweight, natural hydrocarbon absorbent: more cost
effective, more efficient absorbency power, and easier to use than any other products.
Hydro Weed is the component used in all socks, booms
& kits.
What does Hydro Weed do?
Absorbs hydrocarbons by encapsulating them on contact. Requires
less product for storage and disposal. 1 lb. of Hydro Weed will absorb approximately 1
gallon of oil. Absorbs hydrocarbons on contact and resists taking on water.
Will reduce up to 90% of combustible vapors upon application due
to its high vapor suppression capacity.
Removes ALL free oil from spill sites upon extraction.
Absorbs hydrocarbons on land, on hard surfaces i.e., asphalt,
concrete, motor pool parking lots, and on water.
How does Hydro Weed work?
Absorbs hydrocarbons quickly with its capillary action and porous
structure.
Encapsulates hydrocarbons, including PCB's - on contact - taking
in the hydrocarbon, rather than allowing the hydrocarbon to attach to the outer surface of
the product.
Has a 5% moisture level which aids in its high absorbency rate.
Hydro Weed goes through a patented drying process that no other peat can measure up to.
Easy to apply, easy to clean up.
Leaves behind no messy residue after clean up.
What are Hydro Weed's advantages?
Safe for the environment - non-toxic, and biodegradable.
Passes the North American Leachate Standards. Will not release
captured hydrocarbons into the environment.
Reduces man-hours required for cleanup.
Absorbs all oil based products including PCB's and oil based
paint.
Requires less product for spill cleanup which cuts cost.
Less product used means less volume hauled and disposed of in the
landfill. SAVES VALUABLE LANDFILL SPACE.
Can be incinerated. On its own will contribute 7,200 BTU's per
pound during incineration (excluding POL products.) And leaves behind only 0.42% ash
residual.
Recycling and bio-degradability are major environmental concerns.
biodegradability is the answer to these concerns.
-
Fulfills all waste and disposal requirements
of the EPA
LAND OR SEA!
ABSORBS OIL ON CONTACT
Sometimes, the absorbents you use to clean up an oil spill can be
more of a problem than a solution. Conventional absorbents work slowly when applied to a spill and may subsequently release the oil, violating regulatory leachate standards.
biodegradability absorbs on contact to contain the spill. Because of its high and
immediate absorbency, it saves valuable cleanup time.
EFFICIENT
Biodegradability - absorbs up to 12 times its weight. Less storage
space is needed, transportation and handling are made easier and disposal costs are
reduced.
COST EFFECTIVE
Biodegradability with its high absorption capacity results in low
cleanup costs. While other oil absorbents may seem less expensive at first
HYDRO-WEED is actually more cost- effective. For example, it absorbs medium-weight oil 12 times more efficiently than clay.
ORGANIC NON-TOXIC
biodegradability is an organic, non-toxic product which can be
disposed of in a landfill or by incineration in accordance with regulatory guidelines.
ABSORBS OIL NOT WATER
Hydro Weed is ideal for use on water. It is hydrophobic,
i.e., it does not absorb water, and it is oleophilic, i.e. it quickly absorbs oil allowing
for immediate cleanup.
Hydroweed Vs. Clay
Hydro Weed absorbs 12 times its weight in medium oil! One pound of
HYDROWEED - one gallon of oil. One 44 liter bag replaces 450 lbs. of clay!
Meets Leachate Standards
Hydroweed will not release soaked-up oil. An independent laboratory test has
shown that HYDRO-WEED exceeds Leachate standards in the united States and Canada when used to absorb
oil containing PCBs some organo-chlorinated pesticides, cadmium, chromium and lead.
Instantaneous, water-repelling cleanup agent for
industrial and marine oil spills.
How to Dispose of
Hydroweed
There are three proven methods.
1. LANDFILL
Reduces the volume of contaminated absorbent being disposed of in
the landfill. Spills require much less land filled than conventional products 2 to 3 times
less for cleanup and disposal.
Reduces man hours to cleanup spills. This means land filled saves
valuable landfill space when compared to other products.
Reduces hauling costs from the spillto the landfill.
Meets the U.S. and Canadian leachate standards.
land filled will not allow encapsulated hydrocarbons to escape
into the environment This is of great value to companies with an environmentally conscious
agenda since Hydroweed is a natural organic absorbent containing NO CHEMICALS or other
ADDITIVES.
2. INCINERATION
CAN BE INCINERATED! On its own will contribute 7,200 BTU's per
pound during incineration (excluding hydrocarbons). THIS MAKES IT AN EXCELLENT ALTERNATIVE
FUEL!
Generates only 0.42% of ash residual per pound after
incineration.
MANY CEMENT KILNS AND COAL GENERATING FOSSIL FUEL PLANTS COULD
USE HYDROWEED Saturated With HYDROCARBON IN THEIR MANUFACTURING PROCESS.
3. LAND FARMING
Saves valuable landfill space.
Reclaim once unsalvageable soils.
HYDROCARBONS WILL BIODEGRADE 25% FASTER. THE HYDROCARBON WILL
BECOME NUTRIENTS FOR THE SOIL. Remember once LAND FARMING has encapsulated the hydrocarbon
it will not release it into the environment.
TECHNICAL DATA
Absorption: 1 lb. Per 1 gallon hydrocarbon
Reaction Time: Instant
Retention: Meets leachate standards. EPA 131 1-Paint Filtration
9095, Title 40 of the Code of the Code of Federal Regulations ; California Testing.
Toxicity: Non-toxic, environmentally safe
Storage: Keep in a dry place indefinitely
Disposal: Incineration or landfill according to government
regulations
LAND FARMING DOES NOT GENERATE ELECTROSTATIC CHARGES
Licensed in the State of California and Florida for both land and
water use. Chosen to be used in Alaska.
CURRENTLY BEING USED BY ALL BRANCHES OF THE UNITED
STATES NAVY, ARMY, NATIONAL Guard, MARINES, AIR FORCE ; COAST Guard?
LIQUIDS ABSORBED BY LAND FARMING
Acetone
Acetonitrile
Amyl Acetate
Benzene
Butanol
2 - Butanone
Bromodichloromethane
Bromoform
Bunker C
Canola Oil
Carbon Disulfide
Carbon Tetrachloride
Chloroform
Chloromethane
Corn Oil
Cutting Oils
Cyclohexane
Dichlorobenzene
Dichloromethane
1, 2 - Dichloroeteiene
Diesel Fuels
Ethanol
Ethylbenzene
Ethyl Ether
Ethylene Glycol
Gasoline
Heptane
Hexane
Hexachlorobenzene
Hexachlorobutadiene
Hexachloroethane
Hexene
Isobutanol
Isoprene
|
Isopropanol
Jet Fuels
Kerosene
Methanol
Methylene Chloride
Methyl. Ethyl Retone
Methylphenol
Motor Oils
Naphthalene
2 - Nitroaniline
Nitrobenzene
Oil Base Paint
Oil Base Ink
Oil Base Drilling Fluids
Paraffin Oil
Pentane
Pentaciilopiienol
Phenol
Propanol
48% in Acetone
Scintillation Liquid
Silicone Oil (100 cs)
Styrene
Tetrachloroethane
Tetrachloroethylene
Tetrahydrofuran
Toluene
Trichloroethylene
Trichlorophenol
Varsol
Vinyl Acetate
Vinyl Chloride
Xylenes
|
|