NewEnergyComing.com


Marie Peters
850-419-4060
Email Me

Kingdom Grant Free Electricity Program
 Click Here

Save Gas

More

Back Next

Home
Up
Magna-Clean
Soil Eradicator
Insect-a-Shield
Therma-Guard
TF Sealant
Fire Sentry
Soni-Grow
Hydro-Weed
Miracle Shield
Fire Barrier

 

 

Miracle Shield

Miracle Shield is a revolutionary coating that adds luster without the use of silicones or waxes. Miracle Shield dries crystal clear without any buffing, and protects without leaving a greasy or oily feel like the other nationally advertised "protective coatings".

Cleans, protects and beautifies: vinyl, leather, wood, plastics, carpets, chairs, autos, trucks, TV's, boats, rubber, and most painted surfaces.

It even protects against mildew growth, graffiti and wear on virtually all non-cloth surfaces.

It's guaranteed never to chip, crack or peel and will never yellow. It is non-flammable and non-toxic and contains no harmful oils or waxes.

Surfaces
Use Miracle Shield on the following surfaces:

  • Vinyl

  • Plastic

  • Rubber

  • Metal

  • Interior Wood

  • Roof's

  • Concrete

  • Asphalt

  • Stone Work

  • Brick Work

NOTE: Outdoor applications should be a minimum of two coats solution.

Finish- Miracle Shield will dry to a satin or low-luster semi-gloss finish. Which is scratch resistant. There is no buffing required.

Application- Miracle Shield can be applied as follows:

  • Brush it on

  • Spray it on

  • Roll it on with a short nap roller

  • Wipe it on

  • Sponge it on

Miracle Shield hardens best at a surface temperature of 55 degrees or higher on an average of 15-20 minutes.

Surface Preparation- In order for Miracle Shield to work properly, the surface must be free from any dust, dirt grease, grime or wax. You can remove any oil, wax or grease with household rubbing alcohol.

MSDS

Cleaning Properties- Miracle Shield has no known cleaning properties such as some other multi-purpose sealants. However, some applications have shown that mild mars, rust and stains have been removed when applied.

Viscosity- The thickness of Miracle Shield is determined by it's application. The standard application is either by brush, spraying or rolling. With standard applications, about 2 mil. of product is realized per coat.

Product Indications/Preparation- Miracle Shield comes already mixed and ready for use right out of the container. There is no mixing or dilution necessary.

  • No mixing

  • No diluting

  • No concentrates to bother with

  • Water Soluble

  • Ready to use

  • Cleans with soap and water when wet

  • Cleans with alcohol when dry

Restrictions- Miracle Shield is not to be used on glass, mirrors, chrome or brass.

Hazards- Miracle Shield is a mixture of 55% water and 45% chemical solvent.

  • Combustible fumes are emitted in it's wet state

  • Perfectly safe in it's dry state

  • When applying, ventilate area of application well

  • Keep container closed when not in use

Protects Against:

  • Mildew/Moisture/Water

  • Graffiti

  • Grease/Grime/Oil

  • Wear on non-cloth surfaces

Miracle Shield will not chip, crack, peel or yellow.

Order Here


Back Next

Magna-Clean Soil Eradicator Insect-a-Shield Therma-Guard TF Sealant Fire Sentry Soni-Grow Hydro-Weed Miracle Shield Fire Barrier

Home Products Free  Electricity Make Money Contact


More

**To view PDF documents, you will need Acrobat Reader. If you do not have it installed on your computer, you can download it here for free.